It is done! My CalculiX result interface has been implemented in the latest version 2.122 of Fatlab (download link). You can find more information about my latest CalculiX interface development in my blog post “Wind turbine hub…
Tag: fatigue
calculations of fatigue strength
Wheel with moving load in Ansys
About five months ago I started with a steel wheel in PrePoMax. There you can find more information about the design and model setup. Now i reused these wheel geometry and prepared a new mesh…
A chain is only as strong as its weakest link
Some month ago I prepared a geometry from a rest of a bicycle chain in FreeCAD. I used only a caliper to measure the dimensions. Because I really wanted to test the nonlinear contact in…
Wind turbine hub calculation in Fatlab (PrePoMax results)
Finally, my CalculiX interface in Fatlab now works also for more complex results from PrePoMax. The following video shows a complete fatigue calculation run of a simple hub in Fatlab with PrePoMax (Calculix) results. I…
FreeCAD FEM results in Fatlab
If you have a simple model and load you can directly use FreeCAD FEM workbench results in Fatlab. In the previous post I had introduced the newly implemented interface to use CalculiX results in Fatlab…
PrePoMax / CalculiX results in Fatlab
I show my first implementation of a model and unit stress interface for PrePoMax / CalculiX results in Fatlab. Now I am able to import the calculated FEM mesh model from the CalculiX ccx input…
Wind turbine hub fatigue calculation in Fatlab
I used the latest Fatlab version from https://sourceforge.net/projects/fatlab/ and customized it a little bit. If you need more information about Fatlab then check also http://fatiguetoolbox.org. First of all I ported the Fatlab version 2.070 to…
First update
After nearly one year I have found some time to update my website. And I have tested the latest Fatlab version from http://fatiguetoolbox.org/ and customized it a little bit.And I spend some time to recalculate…